تخفيض السعر!
wholesale products power supply 120w aus power adapter supply with customized logo
وصف
wholesale products power supply 120w aus power adapter supply with customized logo
وصف المنتج
Power Input: AC 90~264V
Support production for short circuit/over current/over voltage;
Wide operation temperature range: -40℃~70℃;
100% full load aging test;
High efficiency, long life time and high reliability
Meet EMC Standard;
5 سنوات الضمان.
Support production for short circuit/over current/over voltage;
Wide operation temperature range: -40℃~70℃;
100% full load aging test;
High efficiency, long life time and high reliability
Meet EMC Standard;
5 سنوات الضمان.
مقدمة
PI120W-48 is one economical slim 120W industrial DIN Rail power supply series, adapting to be installed on TS-35/7.5 or TS-35/15 mounting rails. The entire series adopts the full range AC input from 90VAC to 264VAC and conforms to EN61000-3-2, the norm the European Union regulates for harmonic current.
PI120W-48 is designed with metal housing that enhances the unit’s power dissipation. With working efficiency up to 89%, the entire series can operate at the ambient temperature between -40℃ to 70℃ under air convection. It is equipped with constant current mode for over load protection, fitting various inductive or capacitive applications. The complete protection functions and relevant certificates for industrial control
apparatus make PI120W-48 a very competitive power supply solution for industrial applications.
apparatus make PI120W-48 a very competitive power supply solution for industrial applications.
TECHNICAL SPECIFICATION
نموذج | PI120W-48 | |||
انتاج | | Group of Output | 1 | ||
DC Voltage | 48V DC | |||
Default Output Voltage | 48.00-48.2V (VIN: 220بطالة / LOAD: 0A) | |||
Output Rated Current | 1.25أ | |||
Output Current Range | 0-2.5أ | |||
Output Rated Power | 120دبليو | |||
Total Peak Output Power | Up to 180W (Sustainable time 10S/220VAC) | |||
Peak Output Current | 13.75أ(Sustainable time 10S/220VAC) | |||
Ripple noise | Peak – Peak ≤100mV (Test Method: The terminal shall be in parallel with capacitance of 0.1uF and 47uF, testing at 20MHz) | |||
Output Regulation Range | DC47~56V | |||
Stabilized Voltage Precision | ±1% (@ 90-264Vac input, 100% load) | |||
Line Regulation | ±0.5% (@ 90-264Vac input, 100% load) | |||
Load Regulation | ±1% (@ 90-264Vac input, 100% load) | |||
Temperature Coefficient | ±0.03%/℃ | |||
Output Start Time | < 1.5S @ 115VAC | |||
Output Hold Time | > 20ms @ 115VAC, > 125 ms @ 230Vac (100% load) | |||
Voltage Overshoot | ≤5% | |||
إدخال | Input Voltage Range | 90~264VAC | ||
Input Rated Voltage Range | 100~240VAC | |||
Frequency Range | 47Hz~63Hz | |||
Rated Frequency | 50/60هرتز | |||
Starting Voltage | 90فولت تيار متردد | |||
نجاعة | > 85.0% @ 115Vac, > 89.0% @ 230Vac | |||
Input Current | < 1.40A @ 115Vac, < 0.80A @ 230Vac | |||
Inrush Starting Current | < 20A @ 115Vac, < 35A @ 230Vac | |||
عامل القوى | > 0.99 @ 115Vac, > 0.93 @ 230Vac | |||
حماية | انتاج | | 144~180W Swing machine (Testing method: Increase the output current until enabling the protection. Protection mode: Swing machine, Self-recovery after over-power released.) | Over power | |
57~70V V Swing machine (Short circuit the Pin1-2 of U8, swing machine. Output recovery to normal after removing the short circuit) Note: Do not use external الجهد االكهربى. | Over voltage | |||
3-3.75A swing machine (Testing method: Increase the output current until enabling the protection.) Protection mode: Swing machine, Self-recovery after over-current released.) | Over current | |||
It achieves the long-term short circuit by connecting a sufficient cross-sectional area copper cable (Length at 15cm±5cm) مع power output port. Self-recovery to normal after removing the short circuit. | Short circuit | |||
Operation Environment | Operation Temperature and Humidity | -30~70℃; 20%~95%RH | ||
Storage Temperature and Humidity | -40℃~85℃; 10%~95%RH non-condensing | |||
Liberation | Frequency range: 10 ~ 500Hz, Acceleration: 2G, Each sweep cycle 10min. Six sweeps along the X, ص, and Z axis | |||
Surge | Acceleration: 20G, مدة الوقت: 11mS, Three shocks along X, Y and Z axis | |||
Altitude | 2000م | |||
Safety and EMC Standard @25℃ | Security Standard | GB4943/EN60950 ■Reference □Certification | ||
Dielectric Strength | Input—Output:3KVAC/10mA; إدخال–Case:1.5KVAC/10mA; انتاج |—Case:0.5KVDC/10mA Time for each testing is 1min. | |||
Grounding Test | Test Condition: 32A/2min; Ground bond: <0.1 ohms. | |||
Leakage Current | Input to GND ≤3.5mA; Input to output ≤0.25mA (Input 264Vac, 63هرتز) | |||
مقاومة العزل | Input—Output: 10M ohms; | |||
EMI Conducted Interference | EN55022, EN55024, FCC PART 15 CLASS B | |||
Radiated Interference | EN55022, EN55024, FCC PART 15 CLASS B | |||
Harmonic current | EN61000-3-2 CLASS D | |||
EMS | Conducted Emission | EN61000-4-6 Level3 | ||
Radiated Emission | EN61000-4-3 Leve3 criterion B | |||
Power Frequency Emission | EN61000-4-8 Level3 | |||
Electrostatic Emission | EN61000-4-2 Level4 criterion B | |||
EFT | EN61000-4-4 Level4 criterion B | |||
Surge | EN61000-4-5 Level4 criterion B | |||
Dip and Interruption | EN61000-4-11 | |||
البعد (L * W * H) | 135*121*40مم |
طلب
Industrial Control System;
Semiconductor fabrication equipment;
Factory automation;
Electro-mechanical apparatus.
Semiconductor fabrication equipment;
Factory automation;
Electro-mechanical apparatus.
DIMENSION
BLOCK DIAGRAM
DERATING CURVE
PACKING LIST
CONTENT | الكمية | UNIT |
120W Industrial Power Supply (PI120W-48) | 1 | SET |
User Guide | 1 | كمبيوتر |
Warranty Card | 1 | كمبيوتر |
ملف الشركة
إيجابياتنا
صفقة & شحنة
التعليمات
معلومة اضافية
مكان المنشأ: | قوانغدونغ, الصين |
---|---|
اسم العلامة التجارية: | EWIND |
رقم الموديل: | EW-PI120W-48 |
اسم المنتج: | power supply 120w aus power adapter supply with customized logo |
Port Description: | 1 port |
الكلمات الدالة: | power adapter supply |
الكلمة الرئيسية 2: | power supply 120w |
شهادة: | CE FCC ROHS |
طلب: | Security Cctv System |
إدخال: | 48V-56V |
إستعمال: | Electronic Products |
الدعم: | Rail-type installation |
ضمان: | 5 سنوات الضمان |