wholesale products power supply 120w aus power adapter supply with customized logo
Description du produit
Power Input: AC 90~264V Support production for short circuit/over current/over voltage; Wide operation temperature range: -40℃~70℃; 100% full load aging test; High efficiency, long life time and high reliability Meet EMC Standard; 5 ans de garantie.
Introduction
PI120W-48 is one economical slim 120W industrial DIN Rail power supply series, adapting to be installed on TS-35/7.5 or TS-35/15 mounting rails. The entire series adopts the full range AC input from 90VAC to 264VAC and conforms to EN61000-3-2, the norm the European Union regulates for harmonic current.
PI120W-48 is designed with metal housing that enhances the unit’s power dissipation. With working efficiency up to 89%, the entire series can operate at the ambient temperature between -40℃ to 70℃ under air convection. It is equipped with constant current mode for over load protection, fitting various inductive or capacitive applications. The complete protection functions and relevant certificates for industrial control apparatus make PI120W-48 a very competitive power supply solution for industrial applications.
TECHNICAL SPECIFICATION
Modèle
PI120W-48
Production
Group of Output
1
DC Voltage
48V DC
Default Output Voltage
48.00-48.2V （VIN: 220VAC / LOAD: 0A）
Output Rated Current
1.25UN
Output Current Range
0-2.5UN
Output Rated Power
120O
Total Peak Output Power
Up to 180W (Sustainable time 10S/220VAC)
Peak Output Current
13.75UN(Sustainable time 10S/220VAC)
Ripple noise
Peak – Peak ≤100mV (Test Method: The terminal shall be in parallel with capacitance of 0.1uF and 47uF, testing at 20MHz)
Output Regulation Range
DC47～56V
Stabilized Voltage Precision
±1% (@ 90-264Vac input, 100% charge)
Line Regulation
±0.5% (@ 90-264Vac input, 100% charge)
Load Regulation
±1% (@ 90-264Vac input, 100% charge)
Temperature Coefficient
±0.03%/℃
Output Start Time
< 1.5S @ 115VAC
Output Hold Time
> 20ms @ 115VAC, > 125 ms @ 230Vac (100% charge)
Voltage Overshoot
≤5%
Saisir
Input Voltage Range
90~264VAC
Input Rated Voltage Range
100~240VAC
Frequency Range
47Hz~63Hz
Rated Frequency
50/60hertz
Starting Voltage
90V CA
Efficacité
> 85.0% @ 115Vac, > 89.0% @ 230Vac
Courant d'entrée
< 1.40A @ 115Vac, < 0.80A @ 230Vac
Inrush Starting Current
< 20A @ 115Vac, < 35A @ 230Vac
Power Factor
> 0.99 @ 115Vac, > 0.93 @ 230Vac
protection
Production
144~180W Swing machine (Testing method: Increase the output current until enabling the protection. Protection mode: Swing machine, Self-recovery after over-power released.)
Over power
57~70V V Swing machine (Short circuit the Pin1-2 of U8, swing machine. Output recovery to normal after removing the short circuit) Noter: Do not use external voltage.
Over voltage
3-3.75A swing machine (Testing method: Increase the output current until enabling the protection.) Protection mode: Swing machine, Self-recovery after over-current released.)
Over current
It achieves the long-term short circuit by connecting a sufficient cross-sectional area copper cable (Length at 15cm±5cm) avec power output port. Self-recovery to normal after removing the short circuit.
Short circuit
Operation Environment
Operation Temperature and Humidity
-30～70℃; 20%～95%RH
Storage Temperature and Humidity
-40℃~85℃; 10%~95%RH non-condensing
Liberation
Frequency range: 10 ~ 500Hz, Acceleration: 2G, Each sweep cycle 10min. Six sweeps along the X, Oui, and Z axis
Surge
Acceleration: 20G, Duration time: 11mS, Three shocks along X, Y and Z axis
Altitude
2000m
Safety and EMC Standard @25℃
Security Standard
GB4943/EN60950 ■Reference □Certification
Dielectric Strength
Input—Output:3KVAC/10mA; Saisir–Case:1.5KVAC/10mA; Production—Case:0.5KVDC/10mA Time for each testing is 1min.
Grounding Test
Test Condition: 32A/2min; Ground bond: ＜0.1 ohms.
Leakage Current
Input to GND ≤3.5mA; Input to output ≤0.25mA (Input 264Vac, 63hertz)
Insulation Resistance
Input—Output: 10M ohms;
EMI Conducted Interference
EN55022, EN55024, FCC PART 15 CLASS B
Radiated Interference
EN55022, EN55024, FCC PART 15 CLASS B
Harmonic current
EN61000-3-2 CLASS D
SME
Conducted Emission
EN61000-4-6 Level3
Radiated Emission
EN61000-4-3 Leve3 criterion B
Power Frequency Emission
EN61000-4-8 Level3
Electrostatic Emission
EN61000-4-2 Level4 criterion B
EFT
EN61000-4-4 Level4 criterion B
Surge
EN61000-4-5 Level4 criterion B
Dip and Interruption
EN61000-4-11
Dimension (L*W*H)
135*121*40millimètre
Application
Industrial Control System;
Semiconductor fabrication equipment;
Factory automation;
Electro-mechanical apparatus.
DIMENSION
BLOCK DIAGRAM
DERATING CURVE
PACKING LIST
CONTENT
QTY
UNIT
120W Industrial Power Supply (PI120W-48)
1
SET
User Guide
1
PC
Warranty Card
1
PC
Profil de la société
Nos avantages
Emballer & Expédition
FAQ
Informations Complémentaires
Lieu d'origine:
Guangdong, Chine
Marque:
EWIND
Numéro de modèle:
EW-PI120W-48
Nom du produit:
power supply 120w aus power adapter supply with customized logo
