Absorbing Water Inflation Flood Control SAP Bags

Jute flood bag has two different specifications, Jute flood bag40*60CM –UN&Jute flood bag40*60CM –B, please contact sales for actual product specifications and prices.Thank you~

Precautions for use

[About usage]

●Please let the bag fully expand before use.

●This product is for fresh water, and the flood control bag will not swell well with salty water like sea water. Please do not use it in a place immersed in sea water.

●Piling on both sides is more stable.

[About processing methods]

After natural drying, it can be discarded as general garbage. Please follow the environmental protection regulations of the place where you live.

●Coarse salt and calcium chloride can be used for dehydration treatment. (Dosage standard [in the case of calcium chloride]: about 500g/1 piece)

[About reuse] Reuse only when it is naturally dry.

●It cannot be reused if it is dehydrated with calcium chloride and coarse salt.

●Due to the change of water-absorbing polymer, it will not become the first weight when reused.

●Please use 2~3 times as the standard for recycling.

[About Storage method]

Please store it in a dry and moisture-proof place, and no direct sunlight.

●Please do not get in contact with moisture when storing.

[About other matters needing attention]

●Please do not use it for purposes other than simple water block.

●Please do not sit on an inflated bag.

●After absorbing water, the water-absorbing polymer will appear on the surface of the bag to some extent, and it will feel wet, but there is no problem.

●If the water-absorbent polymer gets into your eyes, please wash your eyes immediately with plenty of water for more than 5 minuti, and promptly accept medical treatment.

●If the water-absorbent polymer adheres to the skin, please rinse it off with clean water.

●If you inhale the water-absorbent polymer, don’t force it out, please see the doctor immediately.